product catalogue | terminals | tension clamp technology | modular pe conductor terminals | standard form | 2.5 mm2 - 1 - general ordering data order no. 1608640000 part designation zpe 2.5 version earth terminal, 2.5 mm2, tension clamp connection, wemid, green/yellow, ts 35 ean 4008190076733 qty. 100 pc(s). product notes product description z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm2. pt okiecex/atex rating data eu-type examination certificate kema97atex2521u download, german kema97atex2521u_d.pdf download english kema97atex2521u_e.pdf iecex certificate of conformity iecexuld05.0009u download iecexuld05.0009u_e.pdf atex conductor cross-section 2.5 mm2 iecex conductor cross-section 2.5 mm2 voltage when using cross-connections crossconnectionguide.pdf operating temperature range einsatztemperaturbereich siehe eg- baumusterprfbescheinigung/iecex-certificate of conformity marking en 60079-7 ex e ii marking atex directive 94/9/ec ex ii 2 g d additional technical data colour of insulating material green/yellow connection direction top end plate required yes explosion-tested version "ex e" yes installation advice ts 35 insulating material wemid levels cross-connected internally no
product catalogue | terminals | tension clamp technology | modular pe conductor terminals | standard form | 2.5 mm2 - 2 - additional technical data no. of identical terminals 1 no. of levels 1 no. of terminal strips per level 2 open sides right operating temperature range - 50 c, + 120 c product family z-series type of connection clamped type of mounting snap-on ul 94 flammability rating of insulation material v-0 version pe terminal csa rating data min. cross-section (csa) awg 26 max. cross-section (csa) awg 12 conductors for clamping (additional connection) flexible with ferrule, min. (din 46228 pt 1) 0.5 mm2 flexible with ferrule, max. (din 46228 pt 1) 2.5 mm2 conductors for clamping (rated connection) clamping range, min. 0.05 mm2 clamping range, max. 4 mm2 type of connection tension clamp connection 2nd type of connection clamped connection direction top no. of connections 2 stripping length 10 mm blade size 0.6 x 3.5 mm gauge to iec 60947-1 a3 solid, min. 0.5 mm2 solid, max. 4 mm2 flexible, min. 0.5 mm2 flexible, max. 4 mm2 flexible with ferrule, min. (din 46228/1) 0.5 mm2 flexible with ferrule, max. (din 46228/1) 2.5 mm2 flexible, min., ferrule with plastic collar (din 46228 pt 4) 0.5 mm2 flexible, max., ferrule with plastic collar (din 46228 pt 4) 2.5 mm2 awg conductor size, min. awg 30 awg conductor size, max. awg 12 awg conductor size, min. 0.05 mm2 awg conductor size, max. 3.31 mm2 dimensions width 5.1 mm height of lowest version 39.5 mm length 63 mm ts 35 offset 31.5 mm
product catalogue | terminals | tension clamp technology | modular pe conductor terminals | standard form | 2.5 mm2 - 3 - pe rating data pen function no pollution severity 3 rated cross-section 2.5 mm2 rated impulse withstand voltage to adjacent terminal 8 kv rated short-time current 300 a (2.5 mm2) rated voltage for adjacent terminal 800 v standards iec 60947-7-2 ul rating data min. cross-section (ul) awg 30 max. cross-section (ul) awg 12 approvals approvals institutes downloads dxf 20747_zpe_2.5_dxf.dxf step 1608640000_20747_zpe_2.5_stp.stp classifications etim 2.0 ec000901 etim 3.0 ec000901 eclass 4.1 27-14-03-05 eclass 5.0 27-14-03-05 eclass 5.1 27-14-03-05 similar products order no. part designation version 1690000000 zdk 2.5pe earth terminal, 2.5 mm2, tension clamp connection, wemid, green/ yellow, ts 35 1608650000 zpe 2.5/3an earth terminal, 2.5 mm2, tension clamp connection, wemid, green/ yellow, ts 35 1608660000 zpe 2.5/4an earth terminal, 2.5 mm2, tension clamp connection, wemid, green/ yellow, ts 35
|
